Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 479

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Lines and Trunks
Block of Trunks Procedure
Console/Display Instructions
Enter the trunk number to copy from.

Copy Trunk:
Enter copy from trunk
number
Backspace
Exit
Save your entry.

Select .
Enter
Enter the first trunk number to copy to.

COPY Trunk xxx To:
Enter starting trunk
number
Backspace
Exit
Save your entry.

Select .
Enter
Enter the last trunk number in the block to copy to.

START at Trunk xxx To:
Enter ending trunk
number
Backspace
Exit
Additional Information
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
Enter
xxx = "copy from" trunk entered in Step 1
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
Enter
xxx = "start copy to" trunk entered
in Step 3
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number [ nnn ]
Enter
[ nnn ]
#
If you get the Station Busy message, wait
for an idle condition or exit system pro-
gramming and try again later.
[ nnn ]
#
If you get the Station Busy message, wait
for an idle condition or exit system pro-
gramming and try again later.
June 1997
Page 4-72
[ sspp ]
*
[ sspp ]
*
[ sspp ]
*
Issue 1
PC
Ã
¤