Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 307

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Group Calling Features
Console/Display Instructions
Select the Threshold number.

Group Calling xxxx :
Select one:
Alarm Threshold 1
Alarm Threshold 2
Alarm Threshold 3
Exit
Erase the current number of calls ( nn ).

Group Calling xxxx :
Enter number calls
before alarm n (1-99)
nn
Backspace
Exit
Enter the number of calls to be in the queue before

the alarm threshold notification ( nn = 1 to 99).
Dial or type[ nn ].
Save your entry.

Select
Enter
Next.
Return to the System Programming menu.

Select two times.
Exit
Group Calling External Alert for Calls-In-Queue
Alarm
Use this procedure to designate the external alert device used to notify calling
group members when the number of calls in the queue reaches the programmed
Threshold 3.
Only one external alert device can be designated for each calling group. Since the
external alert signal is continuous, it is recommended that only light-type external
alert devices be designated for the Calls-in-Queue alarm.
Next
Enter
or
Additional Information
xxxx = number entered in Step 5
n = number of alarm threshold (1, 2, or 3)
nn = calls in queue before alarm is
triggered.
Press Drop.
Use program the next calling group. Return
Next
to Step 7.
3
Issue 1
June 1997
Page 3-153
PC
+
Ã