Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 397

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Memory Card
backup filenames, the system automatically replaces the stars in the filename with
the current month and day (
selected
BACK1.
can rename any of the three default files during the backup procedure. The
automatic backup filenames are
change the names of these files.
If you enter a filename that currently exists, the message
appears. You must enter another filename.
While the backup is in progress, you cannot access system programming
functions, your Personal Directory, or alarm clock functions (any programmed
alarms are temporarily deactivated). You may terminate the backup procedure at
any point prior to receiving confirmation of a successful backup.
If any type of programming is taking place at another extension when you begin
the backup procedure, the backup is canceled and the number of the first busy
extension appears on the screen. Attempt the backup procedure again when the
busy extension becomes idle.
If the system is turned off during a backup procedure, the backup is terminated.
The system performs a System Reset (cold start), after which you may repeat the
backup procedure.
If Home or Menu is pressed during a backup procedure, the backup is
terminated. This may result in the deletion of an old backup file. See
''Programming Basics''
NOTE: NOTE: NOTE:
If the system performs a System Erase (frigid start), all programming is set
to the default values. If a previous backup file is available, perform a
restore. If not, the system must be reprogrammed. See
Chapter
''Backup Messages''
backup procedure.
Summary: Backup
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
). For example,
mmdd
***** and performed the backup procedure on January 16. You
AUTO.BACK1
for details about these keys.
for information about the system restore procedure. Also see
for information about errors that may occur during the
System Manager
All
Not required (No extensions are allowed to be in
programming mode except system programming console)
Form 1, System Planning
Not applicable
1- to 11-character filename
Yes
would appear if you
BACK1.0116
and You cannot
AUTO.BACK2.
File already exists
''Restore''
3
Issue 1
June 1997
Page 3-243
Chapter ,
in