Frame Format - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DS1 Facilities
Console/Display Instructions
Enter the new number of digits to delete ( n = 0 to 4).

Dial or type [ n ].
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select four times.
Exit

Frame Format

Use this procedure to specify the framing format for the 100D module as
D4-compatible or Extended Superframe. Your selection must match the framing
mode at the far end of the DS1 facility.
Summary: Frame Format
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
System Manager
All
100D module idle
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
D4 compatible
D4, ESF
No
No
LinesTrunks LS/GS/DS1
no.
Enter FrameFormat
type
Enter Exit
Type slot no.
type
4
4
Dial slot
Select format
Exit
Select format
Issue 1
June 1997
Page 4-94
PC
Ã