Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 210

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Telephones
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To program a single line/trunk:
PC Procedure
Key Mode. An Intercom Ring (ICOM Ring) button, an
Intercom Voice (ICOM Voice) button, and the first eight lines
connected to the control unit are assigned to all analog
multiline telephones, MLX telephones (excluding operator
positions), and MFMs connected to MLX telephones. Two
Intercom Ring buttons are assigned to single-line telephones;
no outside lines are assigned.
Behind Switch Mode. Intercom Ring, Intercom Voice, and
prime line buttons are assigned to all analog multiline
telephones, MLX telephones (excluding operator positions),
and MFMs connected to MLX telephones. Two Intercom Ring
buttons are assigned to single-line telephones; no outside
lines are assigned. When prime lines are assigned to MLX
extensions, lines are not assigned to MFMs used to connect
adjuncts. Lines for MFMs must be assigned separately.
Hybrid/PBX Mode. System Access Ring (SA Ring), System
Access Voice (SA Voice), and System Access Originate
Only (SA Orig Only) buttons are assigned to all analog
multiline telephones and MLX telephones (excluding operator
positions). Five Call buttons are assigned to QCC operator
positions. Two System Access Ring buttons and one System
Access Originate Only button are assigned to single-line
telephones. No personal line or Pool buttons are assigned.
Extension numbers
Yes
Yes
Extensions Lines/Trunks
E
no.
Enter ntry Mode
no.
Enter Exit
To program a block of lines/trunks:
Extensions Lines/Trunks
no. Select trunk range
Enter
On/Off
Enter Exit
To program a single line/trunk:
Type ext. no.
no.
To program a block of lines/trunks:
Type ext. no.
range Toggle letter
Dial ext.
Dial line/trunk
Exit
Dial ext.
Toggle LED
Exit
Type line/trunk
Select trunk
On/Off
G
Issue 1
June 1997
Page 3-56