Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 458

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Lines and Trunks
Console/Display Instructions
Save your entry.

Select .
Enter
Specify the QCC priority lines.

QCC Priority x :
Enter line/trunk number
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Exit
Single Line Procedure
Specify entry mode.

Select
Entry Mode
Enter the line or trunk with the specified queue priority.

QCC Priority x :
Enter line/trunk number
Backspace
Exit
Assign or remove the line/trunk from the specified QCC priority level.

Select
Enter
Delete
Continue to assign or remove lines or trunks, or go to Step 5.

Select .
Next
Entry Mode
.
Delete
Next
Enter
or
.
Additional Information
x = QCC queue priority entered in Step 4
For a single line, go to
Single Line Procedure.
For a block of lines, go to
Block Procedure.
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
#
You may continue to assign or remove the QCC
priority level from additional lines/trunks by
repeating Steps 2 and 3.
Return to Step 2. The next QCC priority level will
be displayed on Line 1.
June 1997
Page 4-51
[ sspp ]
*
[ nnn ]
Issue 1
PC
Ã