Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 238

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Telephone Features
Console Display/Instructions
Specify the language for the extensions.

Lang Exts xxxx to xxxx :
Select one
English
French
Spanish
Exit
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit
Pool Dial-Out Code
Use this procedure to allow or restrict dialing pool dial-out codes and the placing
of calls on specific line/trunk pools. Beginning with Release 3.1, the default
settings restrict all telephones from dialing any line/trunk pool dial-out code.
NOTE: NOTE: NOTE:
Prior to Release 3.1, the default settings allow all telephones to dial any
line/trunk pool dial-out code. Entering a pool dial-out code and then deleting
that code restricts the user from using the pool associated with the entered
code.
Summary: Pool Dial-Out Code
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
xxxx to xxxx = range of extensions
entered in Steps 1 and 3
Select
French
Spanish
Enter
System Manager
Hybrid/PBX
Telephone idle
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct (DLC): Digital
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Station
Data Form 1b, 7500B Data Station
Main pool: 70; All other pools: 890 to 899. All telephones are
restricted from dialing any pool dial-out code.
Additional Information
,
English
, or
.
3
3
Issue 1
June 1997
Page 3-84
PC