Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 672

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Optional Group Features
A maximum of 30 coverage groups are allowed, each with an unlimited number of
members. Up to eight receivers can be assigned per coverage group.
An extension can be a sender in only one group; it can be a receiver for more than
one coverage group. A calling group can be assigned as a receiver for a coverage
group (see "Group Coverage Receiver"). In Hybrid/PBX mode only, the QCC
queue can be a receiver for up to 30 coverage groups. See
Receive Call
If the sender's extension has one or more personal lines assigned, the sender can
be assigned as the principal user so that calls received on the personal line are
sent to receivers programmed for Individual or Group Coverage. See "Principal
User for Personal Line."
To reassign an extension to a new coverage group, just make the assignment; the
extension is automatically removed from its old group.
Summary: Group Coverage Member
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Group Coverage Delay Interval
Use this procedure to specify the number of rings before a call is sent to group
coverage receivers.
Summary: Group Coverage Delay Interval
Programmable by
Mode
Idle Condition
Planning Form
Types''.
Assignments4
System Manager
All
Not required
Form 7c, Group Coverage
Not applicable
Extension numbers
Yes
No
Extensions
no.
Enter
no.
System Manager
All
Not required
Form 7c, Group Coverage
More
Group Cover
Dial ext. no.
Enter
Type group no.
4
4
Issue 1
June 1997
Page 4-265
''QCC Operator to
Dial group
Exit Exit
Type ext.