Music On Hold - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones

Music On Hold

Use this procedure to identify the line/trunk jack reserved for connection of a
music source, such as a radio, tape player, or stereo system.
NOTES:
1. If you use equipment that rebroadcasts music or other copyrighted
2. Only one Music on Hold line/trunk jack is allowed per system.
3. You cannot assign the line/trunk identified for Music on Hold to a
4. You cannot assign the line/trunk identified for use with Music on Hold to
Summary: Music on Hold
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
materials, you may be required to obtain a copyright license from and
pay license fees to a third party [such as the American Society of
Composers, Artists, and Producers (ASCAP) or Broadcast Music
Incorporated (BMI)]. Magic on Hold requires no such license and can be
purchased from your Lucent Technologies dealer.
line/trunk pool. If the line/trunk is currently assigned to a pool, you must
remove it before you program this option.
a button on any telephone or as a Remote Access trunk, and you cannot
use the line/trunk jack identified for Music on Hold for a loudspeaker
paging system or maintenance alarm.
System Manager
All, but in Hybrid/PBX mode the line/trunk designated for
Music on Hold cannot be assigned to a line/trunk pool.
System idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk number
No
No
AuxEquip
no.
Enter
4
4
Dial line/trunk
MusicOnHold
Exit
Type line/trunk no.
Issue 1
June 1997
Page 4-227