Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 667

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
QCC Optional Features
Summary: Message Center Operation
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Extended (Directed) Call Completion
Use this procedure to specify one of the two basic options shown below for QCC
operator positions with a DSS only:
Automatic Completion. Allows one-touch call transfer; that is, calls are
transferred by touching only an extension button on the DSS. The operator
does not have to press the Release button.
Manual Completion. QCC operators must press the Release button to
direct a call using a DSS.
This option cannot be programmed for individual QCC operator positions. The
setting applies to all QCC operator positions.
Summary: Extended Call Completion
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
Not applicable
QCC extension numbers
Yes
No
Operator Queued Call
no.
Enter Exit
Type ext. no.
System Manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
Automatic Extended Completion
Automatic, Manual
No
No
Operator Queued Call
or
Complete Manual Complete
4
Msg Center
Exit Exit
4
4
ExtndComplt
Enter
or
Issue 1
June 1997
Page 4-260
Dial ext.
Automatic
Exit Exit