Programming Procedures - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
1 Programming Basics

Programming Procedures

Console and DSS Lights
The red and green lights (LEDs) next to each of the 20 line buttons show the
status of the line/trunk options. LEDs on the DSS show the status of features
programmed on extensions. See
information.
Console Lights
The green and red LEDs next to each button on the console display the status of
the line/trunk option that is being programmed. For example when you select
Pools from the Lines Trunks menu, the red LED is off if the selected line is not in a
pool and on if the line is in a pool.
that shows the default LED status for line/trunk options.
DSS Lights
The lights on the DSS (if one is attached to the console) show the status of
features being programmed on the extensions. When you select a feature from a
menu, the red LED next to the DSS button is on, off, or flashing, depending on
whether the feature is programmed on the corresponding extension. For example,
when you select
the DSS button lights for each toll-restricted extension.
Displays'', provides a table that shows the default DSS status of LEDs for system
features.
Programming Procedures
The programming procedures provide step-by-step instructions for programming
the communications system. This section details how to make the best use of the
programming procedures.
Procedure Organization
The programming procedures in
Procedures'', and
logical groups. The programming procedures associated with a specific aspect of
the system are grouped together under one heading. For example, to assign
network services for PRI, you would go to the section titled
Interface (PRI)''
reference, see "System Programming Hierarchy" for a list of procedures, based
on the menu hierarchy in
function.
Appendix C, ''LED
Appendix C, ''LED
from the Restrictions menu, the red LED next to
Toll Restrict
Chapter 3, ''Common Administrative
Chapter 4, ''Programming Procedures''
and then locate the network services procedure. For quick
Appendix B, that traces the menu path for a specific
1
Displays'', for more
1
Displays'', provides a table
1
Appendix C, ''LED
1
1
are organized into
''Primary Rate
Issue 1
June 1997
Page 1-9