Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 57

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
1 Programming Basics
Access to System Programming from the MLX-20 Console
System Programming Menu
Figure 1-11
System Programming:
Make a Selection
System
SysRenumber
Operator
LinesTrunks
Exit
Figure 1-11. System Programming Menu Screens
Table 1-3
of each.
Option
System
SysRenumber
Operator
LinesTrunks
Extensions
Options
Tables
AuxEquip
NightSrvce
Labeling
Data
Print
Cntrl-Prog
Language
shows the two screens that make up the System Programming menu.
>
Extensions
Options
Tables
AuxEquip
NightSrvce
lists the System Programming menu options and provides a description
Description
Set system operating conditions.
Select the system numbering plan and/or reassign extension
numbers with one- to four-digit numbers that are more
appropriate or convenient for your company.
Assign or remove operator positions and program operator
features (such as Operator Hold Timer or QCC options).
Program line/trunk options.
Program features for extensions (such as restrictions and
line assignments).
Program systemwide features (such as Transfer Return and
Delay Ring).
Program features that require entering information in a table
(such as Allowed Lists and Disallowed Lists).
Program auxiliary equipment connected to the system (such
as loudspeaker paging and fax).
Program Night Service features.
Program the labels shown on display telephones (such as
entries in the System Directory and Posted Messages).
Specify extensions that need voice and data capability.
Print system programming reports (such as system
configuration and extension assignments).
Perform centralized telephone programming (assign features
to specific buttons on telephones).
Select the language of the system, MLX display telephones,
SMDR reports, and print reports.
1
System Programming: >
Make a Selection
Labeling Language
Data
Print
Cntr-Prg
Exit
Issue 1
June 1997
Page 1-43