Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 644

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
Console Display/Instructions
Select Touch-Tone Interval.

VMS/AA:
Make a selection
TransferRtn
TT Duration
TT Interval
Exit
Erase the current touch-tone interval setting ( xxx ).

Touch-Tone Interval:
Enter interval length
(50-200 ms)
xxx
Backspace
Exit
Enter the touch-tone interval in milliseconds ( nnn = 50 to 200).

Dial or type [ nnn ].
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit
Computer Telephony Integration (CTI) Link
Release 5.0 and later supports the use of an MLX port as a Computer Telephony
Integration (CTI) link.The CTI link allows applications residing on client PCs on a
LAN to communicate more easily with the MERLIN LEGEND Communications
System over a network that has a PassageWay Telephony Server for NetWare.
The following constraints apply to programming an MLX port as a CTI link:
CTI Links cannot be used with communications systems operating in Key
mode or Behind Switch mode.
CTI Link extensions cannot be programmed on tip/ring or analog multiline
telephone module ports. You must chose an extension that is on an MLX
port module (008 MLX or 408 MLX).
You cannot use a port programmed as a potential Operator position as the
CTI Link extension.
Additional Information
If you do not want to change the setting
for touch-tone interval, you have finished
this procedure. Go to Step 15.
Press Drop.
Enter
4
Issue 1
June 1997
Page 4-237
PC
+
Ã