Program Extension - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
5 Centralized Telephone Programming

Program Extension

Select a programming option.

Centralized Programming:
Make a selection
Program Ext
_
Copy Ext
_
Exit
Go to the appropriate section.

The following sections explain the use of menu selections for programming a
single extension (Program Extension), and for using one extension as a template
for programming several extensions of the same type (Copy Extension).
NOTE:
It is recommended that you use the programming codes for centralized
programming; however, you may also use the
available on the programming screen. See
for details about this option.
Program Extension
Review the items below before you begin to program extensions.
UseTable 5-1
If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the button, a beep sounds or the message
Error
happens, press the button again and repeat the procedure.
If you make a mistake and program the wrong feature on a button, follow
the steps below:
1.
2.
3.
Select
Copy Ext
Enter
to locate the code for the feature that you want to program.
appears and the green LED next to the button flashes. If this
Press the button.
Select (press
Delete
Press the button again.
or
Program Ext
.
List Features
''Using the List Feature Menu''
5

on the PC).
Issue 1
June 1997
Page 5-3


option that is
Programming