Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 851

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
D General Feature Use and Telephone Programming
General Feature Use Information
Some features, such as Auto Dial, must be programmed onto line buttons in order
to use them. Other features, such as Privacy, are best used if programmed onto
line buttons—the LED next to the line button provides visual indication that the
feature is in use. The following features must be programmed onto line buttons:
Auto Answer All
Auto Answer Headset
Auto Dial
Barge-In
Coverage
Do Not Disturb
Extension Status—Agent Login/Logout
Feature Button (analog multiline telephones only)
Headset/Handset Mute
Headset Status
Headset Hang Up
Notify
Posted Message (available from display on MLX display telephones)
Saved Number Dial
Signaling
Feature Codes
Feature codes are 1-, 2-, and 3-digit codes that activate features. A feature code
is used by first pressing the dedicated Feature button on MLX telephones;
pressing a programmed Feature button on analog multiline telephones; dialing #
on single-line telephones. Each of these methods sends a signal to the system
that a feature code is about to be dialed. When the code is dialed, the feature is
activated.
NOTE:
Queued Call Console (QCC) system operators cannot use feature codes.
The following features can be used only by dialing feature codes:
Call Pickup
— Group Coverage
— Primary Coverage
— Secondary Coverage
— Coverage Off
D
Issue 1
June 1997
Page D-2