Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 154

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Surrogate Mode Programming
Once you enter surrogate mode programming, you must follow the sequence of
procedures shown below.
At the service location, perform the following:
1.
2.
3.
4.
At the installation site, perform a Restore.
While you are in surrogate mode, the Pass-Thru and Password options are not
available.
NOTE: NOTE: NOTE:
Surrogate mode is available only through the local programming port. You
cannot access surrogate features through the system programming
console.
System Erase
Program the Boards
System Programming
Backup
Issue 1
June 1997
Page 2-70