Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 316

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
System Features
Console/Display Instructions
Erase the current number of rings ( x ).

Transfer Return:
Enter number rings (0-9)
x
Backspace
Exit
Enter the number of rings before a transferred call is returned to the originator

( n = 0 to 9).
Save your entry.

.
Select
Enter
Return to the System Programming menu.

Select twice.
Exit
One-Touch Transfer/One-Touch Hold
Use this procedure to assign the One-Touch Transfer or One-Touch Hold feature.
One-Touch Transfer allows users to initiate transfers to another extension by
pressing an Auto Dial or DSS button for that extension. If the One-Touch Transfer
feature is assigned, you must also specify whether the transfer completion is
manual (the user has to press another button to complete the transfer) or
automatic (the transfer is completed automatically).
The One-Touch Transfer feature is not available on single-line telephones.
One-Touch Hold applies to incoming central office calls only. When the user
presses an Auto Dial or DSS button to initiate a transfer, the outside caller is put
on hold. The system automatically selects an intercom facility and dials the
transfer destination. There is no transfer return function with this method.
Consequently, if the transfer destination does not answer or is busy, the user who
initiates the transfer must notify the outside caller, or the outside caller will remain
on hold.
One-Touch Hold is the factory setting in Behind Switch mode only.
Additional Information
Press Drop.
Enter
Use 0 to indicate that calls are not returned.
Ã
Dial or type [ n ].
3
Issue 1
June 1997
Page 3-162
PC
+