Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 764

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Print Reports
Night Service
Call Pickup Groups
Error Logs
Authorization Codes
BRI Information Report
Switch 56 Data Information Report
NOTE: NOTE: NOTE:
If you select the
minutes to print. You may want to schedule use of the printer during
off-peak hours.
If you select a report for which there is no information, the report header still
prints.
Print reports if you cannot back up your system programming information.
Do not print reports if your system must handle more than 100 calls per
hour.
If you are printing from the console, your printer must be connected to the
SMDR port. If you are programming on a PC with SPM, you have the
following choices:
See Chapter 2, ''Programming with
Summary: Printing System Reports
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
option, keep in mind that the reports take several
All
Print reports on the SMDR printer (if available)
Print reports on the PC printer
Save reports (on hard disk or floppy)
View reports (browse)
SPM'', for details.
System Manager
All
Not required
Not applicable
Not applicable
Any saved report
No
No
4
Issue 1
June 1997
Page 4-357