Common Administrative Procedures; Introduction - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3

Common Administrative Procedures

Introduction

Common Administrative Procedures
0
Introduction
This chapter contains procedures for all of the common administrative tasks
performed by the system manager in response to changes in business
requirements. The procedures described in this chapter are defined briefly below:
Change Basic System Operating Conditions
These procedures apply to the system rather than to the operation of
telephones, lines/trunks, and operator positions. The procedures covered
are:
Renumber extensions
Use this procedure to assign a new extension number to a telephone,
accessory, line/trunk, pool (Hybrid/PBX only), or group. The extension
number to be assigned must currently be unassigned.
Add or change operator positions
Add or delete a system operator position for either the Queued Call
Console (QCC) or the Direct-Line Console (DLC). A maximum of eight
operator positions can be assigned: a maximum of four of these could be
QCCs.
Change telephone line button assignments and optional telephone
features
— Reassign the extension jack used for system programming
— Change the system language
— Set the system date and time
3
Issue 1
June 1997
Page 3-1
3