Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 227

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Telephones
Console Display/Instructions
Specify the extension.

BIS/HFAI Extensions:
Enter extensions
Backspace
Exit
Assign or remove BIS/HFAI capability.

Select
Enter
Delete
Return to the System Programming menu.

Select twice.
Exit
Analog Multiline Telephones with Voice
Announce to Busy
Use this procedure to dedicate a voice or voice pair to be used to provide the
Voice Announce to Busy feature on an analog multiline telephone.
The extension number associated with the first (odd-numbered) extension jack in
the pair is the telephone's extension number. The extension number for the
second (even-numbered) extension jack is dedicated to the Voice Announce to
Busy feature. Calls cannot be placed to the extension jack reserved for the Voice
Announce to Busy feature.
Voice Announce to Busy must be disabled at data stations.
NOTE: NOTE: NOTE:
This procedure does not apply to MLX telephones (Voice Announce to
Busy is automatically provided) and cannot be programmed for single-line
telephones.
Summary: Analog Multiline Telephones with
Voice Announce to Busy
Programmable
Mode
Delete
Enter
or
.
System Manager
All
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 5.
On = telephone has BIS/HFAI capability.
Off = telephone does not have BIS/HFAI
capability.
You may continue to assign or remove
BIS/HFAI capability to additions exten-
sions by repeating Steps 3 and 4.
3
3
Issue 1
June 1997
Page 3-73
PC
Ã