Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 175

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
System Operator Positions
Console Procedure
PC Procedure
Procedure: QCC Operator Positions
Console Display/Instructions
Select the Operator menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
Select Positions.

System Operator:
Make a selection
Positions
Queued Call
Hold Timer
DLC Hold
Exit
Select Queued Call (QCC).

System Operator:
Make a selection
Direct Line
Queued Call
Exit
Specify the QCC extension as a QCC position.

QCC Operator Positions:
Enter extension
Store All
Backspace
Exit
Operator Positions
no.
Enter
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
Delete
Enter
Queued Call
Store All
Type ext. no.
3
If you get the System Busy message,
wait for an idle condition or exit
system programming and try again later.
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 6.
On = extension is currently assigned
Flashing = extension can be assigned as
a QCC position.
Off = extension cannot be assigned as a
QCC position.
Issue 1
June 1997
Page 3-21
Dial ext.
PC
Ã