Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 133

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 5.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2
Programming with SPM
System Programming
When the system is forced idle, the following occurs: multiline telephone users
hear a reminder tone that indicates the telephone cannot be used; display
telephone users see the message
users do not hear a dial tone.
Line or Trunk Idle
Since these procedures require the line or trunk to be idle only at the instant of
programming, the line or trunk is not forced idle. The following procedures can be
performed only when the line or trunk being programmed is idle:
Identify loudspeaker paging line jack
Assign trunks to pools
Specify incoming or outgoing DID- or tie-trunk type
Specify tie-trunk direction
Specify tie-trunk E&M signal
Extension Forced Idle
When an extension or data terminal is forced idle, no calls can be made or
received on that extension or data terminal. The following procedures can be
performed only when the extension or data terminal being programmed is idle:
Assign call restrictions
Assign pool dial-out restrictions
Copy extension assignments
Assign lines, trunks, or pools to extensions
Assign labels to a personal directory
Use centralized telephone programming
When the extension is forced idle, the following occurs: multiline telephone users
hear a reminder tone that indicates the telephone cannot be used; display
telephone users see the message
users do not hear a dial tone.
Forced Idle Reminder Tone
The forced idle reminder tone is a high-low "door-phone" tone 400 ms of 667 Hz
tone followed by 400 ms of 571 Hz tone. The tone is provided under the following
circumstances:
At the extension, to remind the user that the system or the extension is in
the forced idle state
At the programming console or at a PC running SPM, to remind the system
manager that the system (or at least one extension) is in the forced idle
state because of administrative activity
Wait: System Busy
2
2
Wait: System Busy
2
Issue 1
June 1997
Page 2-49
; single-line telephone
; single-line telephone

Advertisement

Table of Contents
loading

Table of Contents