Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 551

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
PRI Facilities
The settings for frame format and zero code suppression must be consistent with
the options selected when the PRI connection was ordered.
If you are using ARS in connection with PRI, make sure you select voice, data, or
voice and data, as appropriate, when you perform the ARS "Voice and/or Data
Routing" procedure found in "Automatic Route Selection."
Switch Type
Beginning with Release 4.2, use this procedure to specify the PRI connection
through the following switch types:
4ESS
5ESS
Nortel DMS-100 BCS 36 for local exchange carrier services
Nortel DMS-250 serving the MCI network
Digital Switch Corporation DEX600E serving the MCI network
Summary: Switch Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
Hybrid/PBX
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
4ESS
Not applicable
Yes
No
LinesTrunks PRI
number Specify switch type
Enter
Type slot number
slot no.
4
4
Dial slot
SwitchType
Enter
Issue 1
June 1997
Page 4-144
+ Type