Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 522

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Tie Trunks
Console Display/Instructions
Return to the System Programming menu.

Select three times.
Exit
Block Procedure
Console/Display Instructions
Specify the block of 20 lines associated with the 20 line buttons on the system

programming console.
Select
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Specify touch-tone or rotary signaling for each line/trunk.

Return to the System Programming menu.

Select three times.
Exit
Tie Trunk Dial Tone
Use this procedure to specify whether the system provides dial tone for people
calling in on a tie trunk. Settings are remote (system provides dial tone) and local
(system does not provide dial tone).
Summary: Tie Trunk Dial Tone
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Additional Information
Additional Information
Toggle the green LED on or off as required.
On = touch-tone
Off = rotary
System Manager
All
Not required
Form 3c, Incoming Trunks: Tie
Remote
Remote, Local
Yes
Yes
4
4
Issue 1
June 1997
Page 4-115
PC
PC