Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 35

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
1 Programming Basics
Programming Procedures
Using Next
When you are programming a feature that can apply to a sequence of extensions,
lines/trunks, or groups, the screen key
( on the PC) permits you to save your current entry and display the next
number in the sequence. You can continue to press
programming the entire sequence. When the last number in the sequence
displays on the screen, press
entry and move to the next step of the procedure. Procedures that allow the use of
direct you to the correct screen to continue programming as shown in Step 6
Next
in the example below below.
NOTE: NOTE: NOTE:
If you plan to take advantage of this key, remember to enter the lowest
number in the sequence at the first prompt.
Specify whether the operator receives the alert.

QCC Operator xxxx :
Select one
InQue Alert Enable
InQue Alert Disable
Exit
Save your entry.

Select
Enter
Next
Return to the System Programming menu.

Select twice.
Exit
System Programming Hierarchy
The following table shows all of the options that are available under each of the
System Programming main menu options displayed on the system programming
console. Following the option name is a brief description of the option and the
page number where detailed instructions can be found.
Enter
Next
Enter
or
1
appears on the console display.
Next
Next
( or on the PC) to save the final
xxxx = operator entered in Step 1
Select
InQue Alert Enable
InQue Alert Disable
Use to program the next QCC position. Go
Next
to Step 5.The next QCC operator will be dis-
played on Line 1. After programming the last
QCC operator position, select enter and go to
Step 7.
1
Issue 1
June 1997
Page 1-21
Next
until you finish
or
.