Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 32

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
1 Programming Basics
Programming Procedures
u
Block of Lines Procedure
Specify the block of 20 lines associated with 20 buttons

on the system programming console.
Select
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
And so on ...

Return to Step 6 of the main procedure.

Saving Entries and Moving Among Screens
At the bottom of each screen are one or more screen keys with functions that
allow you to change your entry, save your entry, or return to a previous screen.
Various combinations of these screen keys appear on each programming screen.
Figure 1-10
QCC Priority x :
Enter line/trunk number
xxx
Backspace
Exit
Figure 1-10. Screen Keys
The PC keys that correspond to the screen key selections are shown here for
quick reference. These PC keys do not appear on the console display screen.
shows the QCC Priority screen with a typical display of screen keys.
Delete
Next
Enter
1
x = QCC Priority entered in earlier Step
xxx = line/trunk number (801–880)
Issue 1
June 1997
Page 1-18