Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 669

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
QCC Optional Features
Summary: Position Busy Backup
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Voice Announce
Use this procedure to enable or disable Voice Announce for the QCC. Voice
Announce is available only on a QCC in Release 4.0 and later.
When Voice Announce is enabled, every QCC in the system has one Voice
Announce Call button, the Call 5 (Ring/Voice) button. All Intercom calls that
originate from a QCC Call 5 (Ring/Voice) button are delivered as Voice Announce
calls.
When Voice Announce is disabled, all Intercom calls originating at the QCC Call
buttons are Intercom Ringing calls.
Summary: Voice Announce
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
No backup
Calling group number
No
No
Operator Queued Call
Drop Dial ext. number
Backup
number
System Manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
Disabled
Disabled, Enabled
No
No
Operator Queued Call
or
Disabled Enter
4
More
QCC
Enter
+ Type ext.
4
4
More
Voice Annc
Exit Exit
or
Issue 1
June 1997
Page 4-262
Exit Exit
Enabled