Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 439

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Lines and Trunks
Console/Display Instructions
Return to the System Programming menu.

Select three times.
Exit
Block Procedure
Specify the block of 20 lines associated with 20 buttons on the system program-

ming console.
Select
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Specify touch-tone or rotary signaling for each block.

Return to the System Programming menu.

three times.
Select
Exit
Rotary Trunk Digit Transfer
Use this procedure to designate whether dialed digits on rotary-dial lines/trunks
are sent one by one as they are dialed (no delay), or are stored and sent when
dialing is completed (delay). Contact your service provider for more information
about the appropriate setting.
Summary: Rotary Trunk Digit Transfer
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Toggle the green LED on or off as required.
On = touch-tone
Off = rotary
System Manager
All
Not required
Form 8a, System Features
No Delay
Delay, No Delay
No
No
More
Options Rotary
Select option
4
4
Select option
Enter
Issue 1
June 1997
Page 4-32
PC
Exit