Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 573

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
PRI Facilities
Console Display/Instructions
Erase the current telephone number ( n ).

Line xxx :
Enter phone number to
send on outgoing calls
N
Backspace
Exit
Enter a telephone number of up to 12 digits to send

( N = any combination of 0 to 9).
Dial or type [ N ].
Continue to assign the telephone number to another line or go to Step 6.

Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit
Test Telephone Number
Use this procedure to assign a test line or trunk telephone number for each 100D
module installed in the control unit.
The number assigned to the test line/trunk must be different from the numbers
assigned to other channels in the same B-channel group. It must be identical to
the number provided by the PRI service provider.
Summary: Test Telephone Number
Programmable by
Mode
Idle Condition
Planning Form
Additional Information
xxx = line entered in Step 1
Next
Press Drop.
Enter
System Manager
Hybrid/PBX, Key
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Return to Step 3. The next line will be
displayed on Line 1.
4
4
Issue 1
June 1997
Page 4-166
PC
+
Ã