Mlx Display Telephones - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
H Programming Special Characters

MLX Display Telephones

MLX Display Telephones
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character in a dialing sequence after a dial-out code to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H-4.
Press ...
Drop
Hold
Conf
#
##
Special Characters for MLX Display Telephones
See ... Means ...
Stop. Halts the dialing sequence to allow for system
s
response.
Pause. Inserts a 1.5-second pause in the dialing sequence.
p
Multiple consecutive pauses are allowed.
Flash. Sends a switchhook flash. Must be the first entry in the
f
dialing sequence.
End of Dialing for extension programming only. Used at
#
the end of a dialing sequence to indicate that the user has
finished dialing or to separate one group of dialed digits from
another.
End of Dialing. Used to signal the end of the dialing
#
sequence or to separate one group of dialed digits from
another.
8
Issue 1
June 1997
Page H-4