Data Features - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures

Data Features

Data Features
This section covers the programming procedure for analog multiline telephones
connected by a General-Purpose Adapter (GPA) to a data terminal and modem.
Other data programming procedures can be found in earlier sections of this book
(see Table
''Centralized Telephone
Table 4-5. Data Features: Programming Procedures
Procedure
Assign Trunks or Pools to Data
Stations
Copy Trunk Assignments
Assign Intercom or System
Access Buttons
Pool Dial-Out Code
(Hybrid/PBX only)
Call Restrictions
Copy Call Restrictions
Forced Account Code Entry
Ringing Options
Assign Data Hunt Group
Members
Assign Data Hunt Group Trunks
or Pools
Group Type
Analog Multiline Telephones at Data Stations
Use this procedure to dedicate a pair of extension jacks to provide the voice and
data to an analog data station.
4-5), with the exception of Ringing options. See
Programming'', for information about Ringing options.
Section/Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter 5, ''Centralized Telephone
Programming''
Chapter
Assignments''
in ''Optional Group Features''
Chapter
Assignments''
Chapter
Calling Features''
Automatic Log ln)
4
3, ''Telephones''
3, ''Telephones''
3, ''Telephones''
3, ''Optional Telephone Features''
3, ''Optional Telephone Features''
3, ''Optional Telephone Features''
3, ''Optional Telephone Features''
3, ''Group Calling Member
3, ''Group Calling Line/Trunk or Pool
in ''Optional Group Features''
3, ''Group Type'' in ''Optional Group
(choice restricted to
4
Issue 1
June 1997
Page 4-359
Chapter 5,