Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 180

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Operator Features
Console Display/Instructions
Select Hold Timer.

System Operator:
Make a selection
Positions
Queued Call
Hold Timer
DLC Hold
Exit
Erase the current hold timer setting ( xxx ).

Operator Hold Timer:
Enter length of hold
timer (10 to 255 sec)
xxx
Backspace
Exit
Enter the number of seconds to hold the call ( nnn = 10 to 255).

Dial or type [ nnn ].
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select .
Exit
DLC Operator Automatic Hold
Use this procedure to enable or disable the DLC Operator Automatic Hold feature
for DLC operator positions. When this feature is enabled, it prevents accidental
call disconnection.
Summary: DLC Operator Automatic Hold
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Additional Information
Enter
System Manager
All
Not required
Form 6a, Optional Operator Features
Disabled
Disabled, Enabled
No
Press Drop.
3
3
Issue 1
June 1997
Page 3-26
PC
+
Ã