Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 152

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Upgrading the System
Table 2-14. Programming Needed after Upgrade to Release 5.0
Feature
CTI Link
Calling Group Alarm
Thresholds
HotLine
Calling Group Hunt
Type
Group Calling Delay
Primary
Announcement
Sequence
Busy out the board first:*
Menu
Maintenance
no.
Enter
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
Program the CTI Link (Note: The switch must be in
Hybrid/PBX mode):
AuxEquip CTI Link
number
Enter
Restore the slot:*
Menu
Maintenance
no.
Enter
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
NOTE: NOTE: NOTE:
If the MLX module containing the CTI Link is the first module, use
the SPM program to busy-out the slot.
Extensions
Dial calling group ext. no.
Alarm
Threshold 1 or Alarm Threshold 2 or Alarm
Threshold 3
calls
Enter
Extensions
extension
Enter
Extensions
calling group ext. no.
Most Idle
Extensions
Calling DelayAnnce
no.
Enter
Exstenion number of Announcent device
program another Announcement device) or
procedure)
Dial the slot
Slot
Busy-Out Yes
Dial extension
Exit Exit
Dial the slot
Slot
Restore Yes
More
Grp Calling
Drop Dial no. of
Exit Exit
More More
HotLine
Exit Exit
More
Grp Calling
Enter Circular
Enter Exit Exit
More
Grp
Dial calling group ext.
Primary Announcement
Exit
Continued on next page
Issue 1
June 1997
Page 2-68
Queue
Enter Alarm
Enter HotLine
Dial
Hunt Type
, , or
Linear
Exit
Enter
(to
Enter
(to end
Exit