Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 865

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
D General Feature Use and Telephone Programming
Telephone Programming
Table D–4, Continued
Step
To continue programming:
Select the feature.
4
If the feature name is on the display:
If the feature name is not on the
display:
To move through the list of features
page by page,
or
To jump to the screen that displays
the feature name.
Respond to any additional prompts
5
on the display.
End programming.
6
To return to the Home screen:
To return to the Menu screen:
MLX display telephones can also be programmed using the method described for
MLX-10 telephones. For example, the programming mode can be entered by
pressing the Feature button and dialing 00, then referring to the display to
continue the programming process. Or, enter programming through the display
and then dial a programming code to select the feature rather than selecting it
from the display.
Action
Select List Feature from the display.
The screen lists feature names in
alphabetical order.
Press the button next to or below the
name of the feature to be programmed.
Press More.
Select Find Feature from the display.
Select the range of letters from the
display that corresponds to the first letter
of the feature name (for example, if the
feature begins with A, select ABC).
If the feature is not displayed on the page
that you jumped to, press More.
When you find the feature you want,
press the button next to or below it.
Select appropriate prompt (for example,
select on or off to turn Inside Coverage
on or off), and/or enter required
information (for example, dial a phone
number for Auto Dial).
Select Enter.
Press Home or lift and replace the
handset.
Press Menu.
Issue 1
June 1997
Page D-16