Show Cpu Utilization - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

show cpu utilization

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show CPU utilization information:
show configuration
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show current configuration information:
21
56 bytes from 10.6.150.34: icmp_seq=2. time=0 ms
56 bytes from 10.6.150.34: icmp_seq=3. time=0 ms
----10.6.150.34 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
Success.
DGS3100#
To measure CPU utilization.
show cpu utilization
The show cpu utilization command displays information about
CPU utilization.
None.
None.
DGS3100# show cpu utilization
CPU utilization service is on.
CPU utilization
----------------------
five seconds:2% ;one minute:1% ;five minutes:1%
DGS3100#
To display the current or saved version of the configuration settings
of the Switch.
show configuration [running | startup]
The show configuration command displays the current or saved
version of the configuration settings of the Switch.
running – Displays the current configuration.
startup – Displays the configuration saved in NV-RAM.
None.