Cpu-Protect Type Packet-Type Pri Pri_Num - D-Link DES-7200 Cli Reference Manual

Chapter 49 CPU Protection Configuration Commands
Related
commands
49.1.2

cpu-protect type packet-type pri pri_num

Use this command to set the priority for the specified type of packets the CPU port receives.
cpu-protect type { arp | bpdu | dhcp | ipv6mc | igmp | rip | ospf | vrrp | pim | ttl1 |
unknown-ipmc | dvmrp } pri pri_num
Parameter
description
Default
Command
mode
Examples
Related
commands
49.2 Showing Related Command
The related commands for CPU protection include:

show cpu-protect mboard

show cpu-protect slot slot-id

show cpu-protect type packet-type
49.2.1 show cpu-protect mboard
Use this command to show the statistics of various packets of CPU protection on the
management board.
49-2
Command
cpu-protect type
packet-type pri pri_num
Parameter
pri_num
The default is 0 for various types of packets.
Global configuration mode.
The following example sets the priority of the BPDU packets as 7:
DES-7210(config)# cpu-protect type bpdu pri 7
Set packet type bpdu pri 7.
Command
cpu-protect type
packet-type
pps pps_value
DES-7200 CLI Reference Guide
Description
Set the priority for the packets the CPU
port receives.
Description
Packet priority in the range 0 to 7
Description
Set the bandwidth for the CPU to
receive the specified type of packets.