Bgp Confederation Settings; Bgp As Path Access List Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
State
Click the Apply button to accept the changes made.

BGP Confederation Settings

This window is used to display and configure the BGP confederation settings.
To view the following window, click L3 Features > BGP > BGP Confederation Settings, as shown below:
The fields that can be configured are described below:
Parameter
Confederation Identifier
Confederation Peer
Click the Apply button to accept the changes made.

BGP AS Path Access List Settings

This window is used to display and configure the BGP AS path access list settings.
To view the following window, click L3 Features > BGP > BGP AS Path Access List Settings, as shown below:
Description
here.
Select to enable or disable the BGP reflector client state here.
Figure 6-185 BGP Confederation Settings Window
Description
Enter the BGP confederation ID here. The range is from 0 to 4294967295.
Select to Add or Delete a BGP confederation peer here. Enter the BGP
confederation peer ID here. The range is from 1 to 4294967295.
345