Table of Contents
Advertisement
®
xStack
Parameter
State
Metric
Click the Apply button to accept the changes made.
IP Multicast Routing Protocol
IGMP
IGMP Interface Settings
The Internet Group Management Protocol (IGMP) can be configured on the Switch on a per-IP interface basis. Each
IP interface configured on the Switch is displayed in the below IGMP Interface Settings window.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Interface
Settings, as shown below:
Click the Edit button to re-configure the specific entry.
Click the Edit button to see the following window.
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Description
Select to enable or disable the RIPng state on the selected interfaces.
Enter the metric value used here. The RIPng route that was learned from the interface will
add this value as a new route metric. The default value is 1. This value must be between
1 and 15.
Figure 6-53 IGMP Interface Settings window
206
Advertisement
Table of Contents
