Buffer-Profile (Configuration) - Dell Z9500 Command Reference Manual

buffer-profile (Configuration)

Create a buffer profile that can be applied to an interface.
Z9500
Syntax
buffer-profile {fp | csf] profile-name {global {1Q | | 4q}
Parameters
fp
csf
profile-name
global
1Q
4Q
Defaults Dynamic
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.2(0.2)
8.3.19.0
8.3.11.0
7.8.1.0
8.3.7.0
7.7.1.0
7.6.1.0
Usage
The buffer-profile global command fails if you have already applied a
Information
custom buffer-profile on an interface. Similarly, when you configure buffer-
profile global, you cannot not apply buffer-profile on any interface.
Debugging and Diagnostics
Enter the keyword fp to create a buffer profile for the Field
Processor.
Enter the keyword csf to create a buffer profile for the
Switch Fabric Processor.
Create a name for the buffer profile,
Apply one of two pre-defined buffer profiles to all of the
port-pipes in the system.
Enter the keyword 1Q to choose a pre-defined buffer profile
for single queue (for example, non-QoS) applications.
Enter the keyword 4q to choose a pre-defined buffer profile
for four queue (for example, QoS) applications.
Description
Introduced on the Z9500.
Changed the default value from global 4q to Dynamic.
Introduced on the S4820T.
Introduced on the Z9000.
Added the global keyword.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
661