Show Ip Bgp Inconsistent-As - Dell Z9500 Reference Manual

Usage
The following describes the show ip bgp flap command shown in the
Information
following example.
Field
Network
From
Flaps
Duration
Reuse
Path
Example
Dell#show ip bgp flap-statistics
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
Duration
h
00:00:03
d
00:00:25
*>
00:00:23
Dell#*>n 66.66.77.77/32

show ip bgp inconsistent-as

View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
Z9500
Syntax
show ip bgp [ipv4 unicast] inconsistent-as
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
Border Gateway Protocol
Description
Displays the network ID to which the route is flapping.
Displays the IP address of the neighbor advertising the
flapping route.
Displays the number of times the route flapped.
Displays the hours:minutes:seconds since the route first
flapped.
Displays the hours:minutes:seconds until the flapped route
is available.
Lists all the ASs the flapping route passed through to reach
the destination network.
n - network,
Network
Reuse
77.0.0.0/24
00:00:00
55.0.0.0/24
00:30:44 200 i
66.0.0.0/24
00:00:00 200 i
EXEC
EXEC Privilege
D - denied, S - stale
From
Path
172.16.0.2
172.16.0.2
172.16.0.2
0.0.0.0
Flaps
1
3
1
0 32768 i
441