Show Ip Ospf Interface - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Sequence
Checksum
Options
Rtr Opt

14.6.43 show ip ospf interface

This command displays the information for the IFO object or virtual interface tables.
Format
Modes
IP Address
Subnet Mask
OSPF Admin
Mode
OSPF Area ID
Router Priority
Retransmit
Interval
Hello Interval
Dead Interval
LSA Ack Interval
Transit Delay
Interval
Routing Commands
Is a number that represents which LSA is more recent.
Is the total number LSA checksum.
This is an integer. It indicates that the LSA receives special
handling during routing calculations.
Router Options are valid for router links only.
show ip ospf interface <unit/slot/port>
Privileged EXEC
User EXEC
Represents the IP address for the specified interface.
A mask of the network and host portion of the IP address for
the OSPF interface.
States whether OSPF is enabled or disabled on a router inter-
face.
Represents the OSPF Area Id for the specified interface.
A number representing the OSPF Priority for the specified
interface.
A number representing the OSPF Retransmit Interval for the
specified interface.
A number representing the OSPF Hello Interval for the speci-
fied interface.
A number representing the OSPF Dead Interval for the speci-
fied interface.
A number representing the OSPF LSA Acknowledgement
Interval for the specified interface.
A number representing the OSPF Transit Delay for the speci-
fied interface.
v1.0, March 2006
14-51