Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
13.2.2 show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Format
Mode
Interface
Multicast Router
Attached
VLAN ID
13.2.3 show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
Format
Mode
Interface
VLAN ID
13.2.4 show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the MFDB table.
Format
Mode
MAC Address
Type
13-8
show igmpsnooping mrouter interface <slot/port>
Privileged EXEC
Shows the port on which multicast router information is
being displayed.
Indicates whether multicast router is statically enabled on the
interface.
Displays the list of VLANs of which the interface is a mem-
ber.
show igmpsnooping mrouter vlan <slot/port>
Privileged EXEC
Shows the port on which multicast router information is
being displayed.
Displays the list of VLANs of which the interface is a mem-
ber.
show mac-address-table igmpsnooping
Privileged EXEC
A multicast MAC address for which the switch has forward-
ing or filtering information. The format is two-digit hexadec-
imal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address is
displayed as a MAC address and VLAN ID combination of 8
bytes.
Displays the type of the entry, which is either static (added by
the user) or dynamic (added to the table as a result of a learn-
ing process or protocol).
v1.0, March 2006
IGMP Snooping Commands