Show Igmpsnooping Fast-Leave; Show Igmpsnooping Mrouter Interface; Show Mac-Address-Table Igmpsnooping - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Fast Leave Mode
Group Membership Interval Time

show igmpsnooping fast-leave

This command displays IGMP Snooping Fast-leave information. Configured information is
displayed whether or not IGMP Snooping is enabled.
Format
Mode
Fast-Leave Admin Mode

show igmpsnooping mrouter interface

This command displays information about statically configured ports.
Format
Mode
Slot/Port
Multicast Router Attached
VLAN ID

show mac-address-table igmpsnooping

This command displays the IGMP Snooping entries in the Multicast Forwarding Database
(MFDB) table.
Format
Mode
Mac Address
8-112
This indicates whether or not IGMP Snooping Fast-leave is active on the
VLAN.
The Group Membership Interval time is the amount of time in
seconds that a switch will wait for a report from a particular group on a particu-
lar interface, which is participating in the VLAN, before deleting the interface
from the entry.This value may be configured
show igmpsnooping fast-leave <
Privileged EXEC
This indicates whether or not IGMP Snooping Fast-leave is active on the inter-
face.
show igmpsnooping mrouter interface <
Privileged EXEC
The port on which multicast router information is being displayed.
This indicates whether or not multicast router is statically enabled on the
interface.
The list of VLANs of which the interface is a member.
show mac-address-table igmpsnooping
Privileged EXEC
A multicast MAC address for which the switch has forwarding and or filtering
information. The format is two-digit hexadecimal numbers that are separated by
202-10102-01, May 2005
slot/port
>
slot/port
>
Switching Commands