Body Ground-To-Battery Ground; Body Ground-To-Coaxial Shield - Jeep 1987 Wrangler Workshop Manual

ACCESSORIES
STANDARD RADIO
A N T E N N A
Body irouii-Ti-Baiery Ground Test 3
Test 3 checks condition of the vehicle body
ground connection as follows:
• Connect one ohmmeter test lead to the vehicle
fender and the other lead to the battery
negative post.
• Resistance should be less than one ohm.
• If resistance is more than one ohm, check the
braided ground strap connected to the engine
and vehicle body for being loose, corroded, or
damaged. Repair as necessary.
SEE
I.S.
N
O
T
E
S
Body Iround-To-Ciaiial Shield Test 4
Test 4 checks condition of the ground between
the antenna base and vehicle body as follows:
• Connect one ohmmeter test lead to the fender
and the other lead to the crimp on the coaxial
shield,
• Resistance should be less then one ohm.
• If resistance is more than one ohm, replace
the antenna base attaching screws with new
cadmium plated screws.
M-4