ELECTRICAL
INTERIOR LIGHTING SYSTEM
The engine must not start in the R E V E R S E ,
D R I V E , S E C O N D G E A R or F I R S T G E A R
position.
As an aid to adjusting the backup lamp switch,
install a test lamp to the lamp side of the switch
and ground one side of a test lamp. When the
test lamp lights, the backup lamps are operating.
STOPLAMP SWITCH REMOVAL
Refer to the Steering Column Section for
removal procedure.
STOPLAMP SWITCH INSTALLATION
Refer to the Steering Column Section for
installation procedure.
STOPLAMP SWITCH ELECTRICAL TEST
Refer to the Electrical Troubleshooting Manual
(ETM).
C-126