Indicator Bezel Removal; Indicator Bezel Installation; Headlamp Switch Installation - Jeep 1987 Wrangler Workshop Manual

ELECTRICAL
INSTRUMENT PANEL
S E E
I.S.
N
O
T
E
S
INDICATOR BEZEL REMOVAL
Remove five bezel screws (A).
Disconnect the two indicator connectors (C).
A. Indicator Bezel Mounting Tab(s)/Screw(s)
B. Indicator Socket(s)
C. Indicator Printer Circuit Connections
D. Indicator Illumination
E. Rear Defogger Switch
F. Fog Lamp Switch
G. Illumination Rheostat
H. Headlamp Switch
INDICATOR BEZEL INSTALLATION
Fasten the five bezel screws (A) into the
instrument panel. Be sure the indicator wires are
not pinched behind the bezel.
HEADLAMP SWITCH REMOVAL
Disconnect negative battery cable.
Remove two headlamp switch attaching
screws (B).
Remove the headlamp switch connector.
101338A
HEADLAMP SWITCH INSTALLATION
Plug in the headlamp switch connector.
Insert the headlamp switch attaching screws
(B).
Connect the negative battery cable.
C-156