Front Springs; Front Track Bar Installation; Rear Track Bar Installation; Front Spring Removal - Jeep 1987 Wrangler Workshop Manual

SUSPENSION
SUSPENSION COMPONENT SERVICE
S E E
I.S.
N
©
T
E
S
Front
Track
Bar Installation
Position the track bar (A) mounting eyes in the
frame rail and axle brackets.
Install and tighten the track bar attaching bolts
and nuts to 100 H*m (74 ft-lbs) torque.
Rear Track Bar Removal
Raise the vehicle.
Remove the bolt and nut that attach the track
bar (1) to the frame rail bracket (2).
Remove the bolt and nut that attach the track
bar to the axle bracket (3).
Remove the track bar.
.// / / //
101297
Rear Track Bar Installation
Position the track bar (1) mounting eyes in the
frame rail and axle brackets (2 and 3).
Install and tighten the track bar attaching bolts
and nuts to 100 N°m (74 ft-lbs) torque.
FRONT SPRINGS
Front Spring Removal
Raise the vehicle.
Remove one or both front wheels as necessary.
J-S