Jeep 1987 Wrangler Workshop Manual page 1052

HEATING AND AIR CONDITIONING
AIR CONDITIONING SYSTEM
J 29640
84438
CAUTION: Do not touch the lapping surfaces of
the replacement seal.
Dip the mating surfaces of the seal lapping sur-
faces in clean compressor oil.
Engage the slots of remover/installer tool J
29639 in the slots in the seal cage. Insert the
seal assembly firmly into place in the compres-
sor seal cavity.
81077B
Twist tool J 29639 in the opposite direction to
disengage the tool from the seal cage.
CAUTION: When installing the shaft seal O-ring,
do not scratch the O-ring groove with the hook
tool.
Coat the O-ring with clean compressor oil. In-
stall it carefully in the seal groove with O-ring
hook J 9553-01.
L-46