Cylinder And Bearing Removal - Jeep 1987 Wrangler Workshop Manual

CLUTCH
CLUTCH SERVICE
2
5. INSULATOR
6. RETAINING NUT
101261
Cylinder and Bearing Removal
Disconnect the master cylinder line (7) from the
slave cylinder inlet line (3)
Remove the transmission and transfer case as
outlined in Chapter E.
Slide the rubber insulator (5) out of the insulator
bracket (4) and off the slave cylinder lines.
Remove the bolts attaching the insulator brack-
et (4) to the clutch housing and slide the bracket
off the cylinder lines (2-3).
D-9