Jeep 1987 Wrangler Workshop Manual page 1284

AUTOMATIC TRANSMISSIONS
OVERHAUL
S E E
I.S.
N
O
T
E
S
84470
Install the 1 -2 and 2-3 shift valve governor plugs
(A) (B).
Install the shuttle valve (7), primary spring (3)
and the throttle plug (2).
Install the governor plug end plate (1) and
tighten the screws to 4 N-m (35 in-lbs) torque.
Install the spring guides (6), shuttle valve
secondary spring (5), and the E-clip (4).
Install the shuttle valve cover plate (C) and
tighten the screws to 4 N-m (35 in-lbs) torque.
24